T419S Indicator User Instructions 23
4.2 About menu
Use the Left and Right keys to highlight the menu item you want to access and press
the ENTER key.
Boot PartNo - See the bootloader part number.
Version - See the version of the bootloader.
Firm PartNo - See the firmware part number.
Version - See the version of the firmware.
App PartNo - See the application part number.
Version - See the version of the application.
Serial See the serial number of the indicator.
Option Bus 1 or 2 - Choose the Bus of the option card.
Card 1 or 2 - Choose the Card you want to view.
l Type - View the type of card.
l Version - View the firmware version of the card.
Enet This stands for Ethernet. Use this to view the network addresses:
IP Addr - See the IP address.
Subnet - See the Subnet address.
Gateway - See the Gateway address.
MAC - See the MAC address.
DLoad This stands for download. Use this to view the following:
sSerial - View the license number that created the configuration file.
dSerial - View the license number that downloaded the configuration file.
dName - View the company name for the license shown for downloading.
This is used for security and licensing purposes.
BSQ Scale X - Choose the scale.
l SW Part - View the firmware part number of the cell that is
connected.
l Version - View the firmware version of the cell that is
connected.
l Cur. Ser - View the serial number of the cell that is connected.
l Cal. Ser - View the serial number of the cell that WAS
connected at the time of calibration.
You can exit the menu by following the instructions in Escaping or exiting from a menu
on page 13.
To Next Page
Loading...
Need help?
General
