Bticino 344163 Polyx Memory Display User Manual

38
5.2.3 Door state
This function tells you about the door lock state. If it is open the “door
lock LED” flashes, if it is closed it remains OFF.
NOTE: it can only be activated if your system allows it (ask your installer
for more information); it can not be activated at the same time as the
Professional Studio function
f it is activated the Polyx Memory Display tells you if the antintrusion
system has detected an alarm. The three LED flash alternately until a
key is pressed to display the message (if locally supplied the message
will be displayed automatically). To cancel the message press the C key
when the message is displayed. If not the signal will appear the next
time a key is pressed.
Select
Door state
Enable or disable
the function
Select
Alarm MSG
Enable or disable
the function
5.2.4 Alarm messages
SERVICES
DOOR STATE
SERVICES
ALARM MSG
5 Services
Select
Services
Press OK
to confirm
Select
Services
Press OK
to confirm

Bticino 344163 Polyx Memory Display Specifications

General

Brand	Bticino
Model	344163 Polyx Memory Display
Category	Intercom System
Language	English