BTL 2000 Series - 2.4 Medical Field Selection; 2.4.1 User diagnoses

BTL-2000
USER'S MANUAL & USER’S GUIDE
Page 8 z 45
Using the [ + ] and [ - ] arrows, insert the safety code. Use the [TAB] push button to move cursor to the next position.
Once the code has been entered, press the [ENTER] push button. The manufacture code is preset as 0000. Press
the [ESC/STOP] push button to delete inserted values and to return to the first position.
If the code is entered correctly, the display will show menu which can be preset using the [Sart with] function. If the
code is not correct, the cursor will move to the first position of the code.
BTL-2000
UNIVERSAL
D I A G PROG
M A N MENU
Use the relative push buttons on the instrument front panel to select from the four programmes on the Main Menu.
2.4 Medical Field Selection (push button [DIAG])
When pressing the [DIAG] push button the instrument will enter the Medical Field Menu and it is then possible to
select a preset medical field, Acupuncture frequency (Nogier or EAV), or user created programmes.
According to user specialization, there is only one medical field pre-programmed in the instrument. Additional medical
fields are available but not included.
User diagnoses
Nogier
EAV
Dentistry
Dermatology
Gynaecology
ENT
Rehabilitation
Neurology
Orthopaedics
Sports medicine
Paediatrics
General Practitioner
Example of medical field menu:
> U se r diagnoses
N o g i er
E A V
D e n t istry
Use the [ + ] or [ - ] arrows to move between medical fields and press the [ENTER] push button to select desired
medical field. Press the [ESC/STOP] push button to return to the previous menu.
2.4.1 User diagnoses
This setting allows searching for and selecting a user diagnoses with preset therapeutic parameters.
If there are no user diagnoses in the memory, “Memory free” will appear on the display.
If there are less than 6 user-created diagnoses in memory, a list of these diagnoses in alphabetical order will appear
on the display. If there are 6 or more user-created diagnoses in memory, the following diplay will appear:
U S E R DIAGNOSES
F i r s t char: _