btsr SM-DIN/MULTILOOP/ETH - Page 32

Installation and Connections
SM-DIN/MULTILOOP.. - 2.12 -
SMART MATRIX CONFIGURATION
Enter the BOARD SETUP menu.
Select SMART MATRIX.
/
To change the parameter value
NO = does not allow the operator to program the style parameters by
means of the Matrix Touch terminal
YES = allows the operator to program the style parameters by means of
the Matrix Touch terminal
3 sec to confirm and go back to BOARD SETUP menu
LOCK SETPOINT CONFIGURATION
Enter the BOARD SETUP menu.
Select LOCK SETPOINT.
/
To change the parameter value
NO = allows the DIAPERFEEDER tension value to exceed the TS55/TMS
tension value during control process
YES = does not allow the DIAPERFEEDER tension value to exceed the
TS55/TMS tension value during control process
3 sec to confirm and go back to BOARD SETUP menu
BOARD SETUP
→
SMART MATRIX
BOARD SETUP
→
LOCK SETPOINT