C−LRV lift control valve Operation
76/92
300−I−9010212−E−10/08.08
5.1.4.3 Null point / Hall sensor menu (3)
S Displays the current feedback value
5.1.4.4 Information menu / Commands" (4)
Setting "Language/Sprache"
S Selection of the user language
S Possible languages
− German
− English
− French
− Italian
S Standard: German
Command "Load parameter"
S Overwrites the current parameters with the internally−saved
parameters
S Possible parameter sets
− Factory (factory settings)
− User
Command "Save parameter"
S Saves the current C−DELCON parameters as the User parameter set
Setting "Password"
S Prevents unauthorised changes to parameters
S Consists of any 4 numbers
S Password 0000" means: protection not activated (factory setting).
Command "Delete errors"
S Deletes the error list
Command "Pipe rupture"
S Simplified test procedure for the pipe−rupture valve, see page 62
To Next Page
Loading...
Need help?
General
