31
Melting point B-540 5 Operation
5.9.4 Definition of the RS-232 C interface
In this menu, you can change the following setting:
• Transfer speed (baud rate)
• Data word length
• Parity
• Number of stopbits
Press MENU for three seconds to return to the range of sub-
menus.
Press MENU twice to change to the menu window.
Press UP/DOWN to select the correct RS-232 C interface.
When pressing ENTER, the newly selected RS interface will
be displayed for all determinations.
Press MENU again for three seconds to return to mainmenu 1
RS232 C : XXXX XXX
To Next Page
Loading...