Buchi R-215 - Immersion angle of the evaporating flask into the heating bath; Lowering and raising the evaporating flask into and out of the heating bath

3 Technical data
22 R-210/215 Operation Manual, Version B
3.1.4 Upgrade
Table 3-3: Upgrade R-210 to R-215 - optional
Product Order number
Upgrade R-210 to R-215, display for
rotation speed and vapor temperature
(without probe)
Note:
Only to be installed by a Buchi service
engineer.
48376
1 sensor for measuring the vapor
temperature (only with R-215 and with
glass assembly V + S + E)
40340
3.2 Materials used
Table 3-4: Materials used
Component Material designation
Housing Rotavapor Aluminium
Guides lift Hardened steel / stainless steel
Casting components PBT partially glass reinforced
Housing bath PBT partially glass reinforced
Bath Stainless steel
Protective ring PBT partially glass reinforced
Protective shield Polycarbonate
Center rotation drive Stainless steel
Condenser fl ange Aluminium
Seal NBR, Tefl on