Buchi R-215 - Functional principle of a Rotavapor; Functional principle considering the V assembly as example; Controls of Rotavapor R-210;215

1 About this manual
6 R-210/215 Operation Manual, Version B
1 About this manual
This manual describes the Rotavapor and provides all information required for its safe operation and to
maintain it in good working order.
It is addressed in particular to laboratory personnel and operators.
NOTE
The symbols pertaining to safety (WARNINGS and ATTENTIONS) are explained in chapter 2.
1.1 Reference documents
For information on the Vacuum Controller V-850/855 and the Vacuum Pump V-700/710, please refer
to the corresponding manuals available in English, German, French, Spanish and Italian:
Vacuum Controller, Operating Manual numbers 93081–93085
Vacuum Pump, Operating Manual numbers 93090–93094
1.2 Trademarks
The following product names and any registered and unregistered trademarks mentioned in this
manual are used for identifi cation purposes only and remain the exclusive property of their respective
owners:
Rotavapor
®
is a registered trademark of Büchi Labortechnik AG
Tefl on
®
is a registered trademark of DuPont or its affi liates
Kalrez
®
is a registered trademark of DuPont
1.3 Abbreviations
NBR: Butadiene-acrylonitrile rubber
P+G: PLASTIC + Glass is a unique protective layer for glass components. It offers improved mechan-
ical rupture resistance and increases protection against broken glass. It also makes sure that the
sample is not lost in the receiving fl ask, if the fl ask is damaged.
PBT: Polybutylene Terephthalate
Rpm: Rotations per minute
•
•
•
•
•