3 Technical data
23 R-210/215 Operation Manual, Version B
3.3 Technical data overview
Table 3-5: Technical data
R-210 Rotavapor
without display
R-215 Rotavapor with
display
B-491 Heating bath B-495 Heating bath
Glass assemblies A, V, C, S, E, CR, BY
Dimensions ( W x H x D) 550 x 575 x 415 mm 285 x 240 x 300 mm 310 x 230 x 320 mm
Weight 16 – 18 kg (depending on the glass
assembly)
4 kg 5 kg
Connection voltage 100 – 240 V ± 10% 100 – 120 V or 220 – 240 V ± 10%
Mains connection 3-pole (P, N, E) via power cord 3-pole (P, N, E) via power cord
Frequency 50 / 60 Hz 50 / 60 Hz
Power consumption max. 60 W max. 1700 W
Installation category II II
Degree of protection IP21 IP21
Pollution degree 2 2
Rotation speed range 20 – 280 rpm
Flask size 50 – 4000 ml up to 4000 ml up to 5000 ml
Max. fl ask content 3 kg
Temperature control
range
20 °C – 180 °C 20 °C – 95 °C
Display Scale 1–10 Rotation speed /
vapor temperature
Set /
actual temperature
Temperature accuracy ± 2 °C
Environmental conditions
Temperature
Altitude
Humidity
for indoor use only
10 – 40 °C
up to 2000 m
maximum relative humidity 80% for temperatures up to 31 °C, and then linearly
decreasing to 50% at 40 °C
Bath content 4 l 5 l
Vacuum tightness of
system
5 mbar per 3 minutes at a pressure of
< 10 mbar
Temperature resistance
P+G
ca. -70 °C – 60 °C
Temperature resistance
P+G low temperature
-80 °C – 50 °C
Temperature resistance
protective shield
< 160 °C
To Next Page
Loading...
