Buchi R-215 - Sealing System

10 Spare parts
70 R-210/215 Operation Manual, Version B
Table 10-7: Glass assemblies BY
Product Order number Product Order number
Glass assembly BY complete with 1 l
receiving fl ask
48176 Clip for receiving fl ask S35 03275
Glass assembly BY P+G complete with 1 l
receiving fl ask
41966 Shut-off valve 40626
Vertical condenser BY 48177 Vapor duct SJ 29/32 with Combi Clip 48160
Vertical condenser BY P+G 35040 Vacuum connection including cock 35026
PTFE tube 300 mm 00646 Screw cap GL-10 23875
Tube clips GL-14 bent complete, set of 4 37287 FPM-O ring 3 x 2.7 mm 23900
Gasket WD 26 (seal) 48021 PTFE tube, 600 mm 28096
Refl ux insert, complete 48080 Stop cocks SJ 18.8 / 38 40627
Support rod complete (optional) 48180 Set of tube clips straight GL-14,
4 pieces, 4 x olive straight with screw
caps
37642
PTFE disk (drain disk) 40625 Set of tube clips GL-14, 4 x bent / 2 x
straight / 6 x screw caps
38000
Distribution head including 23900
+ 23875
40657 Cross sleeve 27344
Distribution head P+G including 23900 +
23875
40658 Rubber band 32013
10.8 Sealing system
Table 10-8: Sealing system
Product Order number
Gasket WD 26 (vacuum seal) 48021
O-ring (part of the refl ux insert), complete 48078