Buchi R-215 - Page 64

10 Spare parts
64 R-210/215 Operation Manual, Version B
Table 10-4: Glass assemblies S
Product Order number Product Order number
Glass assembly S complete with 1 l
receiving fl ask, without seal and vapor duct
40650 Shut-off tab 40626
Vertical condenser S, including
tube clips GL-14 complete
40651 Stop cocks SJ 18.8/38 40627
Glass assembly S complete, P+G with
1 l coated receiving fl ask, without seal and
vapor duct
40652 PTFE tube 300 mm 00646
Vertical condenser S, P+G + tube clips
GL-14 complete
40653 Clip for receiving fl ask S35 03275
Set screw cap GL-14 40624 Distribution head including 23900
+ 23875
40657
PTFE tube, 600 mm 28096 Screw cap GL-10 23875
Tube clips GL-14, bent, complete,
set of 4
37287 FPM-O ring 3 x 2.7 mm 23900
Refl ux insert, complete 48080 Distribution head P+G including 23900 +
23875
40658
Gasket WD 26 (seal) 48021 Set of tube clips straight GL-14,
4 pieces, 4 x olive straight with screw
caps
37642
Vapor duct SJ 29/32 with Combi Clip 48160 Set of tube clips GL-14, 4 x bent / 2 x
straight / 6 x screw caps
38000
PTFE disk (drain disk) 40625 Cross sleeve 27344
Support rod complete (optional) 48180 Rubber band 32013
Vacuum connection including cock
(optional)
01006