Buckeye X80 - 5. Connecting to a Cell Base (Continued); Connect the antennas; Open the enclosure lid; Move the toggle switch down to the ON position

5. Connecting to a Cell Base
Connect the antennas.
Open the enclosure lid.
Move the toggle switch down to the ON position.
Wait for the first LED to blink slowly and the second
to be on solid.
This may take several minutes.
X80 Wireless Camera User's Manual v2.0 9 of 35
Cell
Camera
Cell Base
3
Cell Base
4
Cell Base
5
Cell Base
6
O
N
Blink
On