Buddipole PowerMini USB User Manual

Technical Reference
POWERmini USB User Guide 14 2.0
Battery life is degraded by allowing a battery to fall below the 100% discharged state. For optimum life a
fully discharged battery should be recharged as soon as possible. Leaving a battery in a fully discharged
state may dramatically reduce the capacity and cause permanent damage to the battery.
To avoid having the power disconnected unexpectedly at an inconvenient time you can disable the auto
shut off feature, but be aware that you may adversely affect the life of the battery if you continue to
operate below the Low Voltage Limit setting.
Default Settings
The following table shows the values that are set at the factory, but if these can be changed to better suit
your needs if required. See the following section for details.
PARAMETER
DEFAULT VALUE
Battery Type
Lithium ion (LiFePO4)
Max Charge Voltage
14.2V
Auto Off
Disabled
Audible alarm
Enabled
Low voltage limit
12.9V
Low voltage reset
13.4V
High voltage limit
15 V
High voltage reset
14.5V

Buddipole PowerMini USB Specifications

Battery

battery type	Lithium ion or Lead Acid
maximum battery input voltage	24 V DC
minimum battery input voltage	10V DC
maximum solar input voltage	24 V DC
maximum solar charge current	11 A
maximum charge voltage	12-15 V (user adjustable)

Power

maximum load current	35 A (continuous)
over voltage disconnect range	14 – 16 V (user adjustable)
low voltage disconnect range	10.5 – 13 V (user adjustable)

Ports & Interfaces

number of 12V DC output ports	2
DC power connectors	Anderson Powerpole® 45A
USB charger output connector	USB type A connector

Operating Environment

operating temperature range	0 – 40 degrees Celsius
reverse polarity protection	Battery and Solar Panel inputs
audible alarm	User settable enable, disable

Weight and Dimensions

overall size	4.5 (W) x 3.2 (D) x 1.3 (H) inches
size in mm	115 (W) x 82 (D) x 33 (H) mm
weight	6.2 oz (176g)