Functional Description
POWERmini USB User Guide 6 2.0
Operating Time
POWERmini USB keeps track of the amount of time that has passed from power up time and displays the
information on the System Report page.
Restore Factory Defaults
Use the following procedure to reset the unit back to the setup provided with each new unit.
• Disconnect the POWERmini USB from the battery and solar input
• Press and hold the SEL button and connect the battery to the battery input port
• When the splash screen has displayed, and you hear a brief beep, release the SEL button
• Reconnect the solar panel (if in use).
The default values will have been restored to the system. Before using the device please check that you
have settings that are suited to your system. It is particularly important to check that the correct battery
type has been selected.
To Next Page
Loading...