8
Boiler inspection and maintenance
Logano G234X – 6 720 804 886 (2012/08) 29
8.8 Maintenance protocol
Please check off the maintenance work as it is completed and record the
measured values.
Follow the instructions on the following pages.
Maintenance work Page Date: Date:
1. Inspection of the flue system including combustion
air, inlet and outlet openings
page 23
2. Gas manifold pressure page 23
page 13
3. Inspection of burner page 23
4. Cleaning of boiler page 24
5. Cleaning of burner page 26
6. Measuring gas supply pressure page 18 ____________inches W. C. ____________inches W. C.
7. Measuring orifice pressure page 18 ____________inches W. C. ____________inches W. C.
8. Checking for leaks in operating condition page 17
9. Checking pilot burner flame page 24
10. Checking main burner flame page 18
11. Check the vent damper page 18
12. Check high temperature limit control page 21
13. Check the area around the boiler for flammable
materials, gasoline or corrosive liquids.
page 18
14. Confirm maintenance
Confirmation of correct maintenance
(company stamp, signature)
Table 13 Maintenance protocol
Date: Date: Date: Date: Date:
____________inches W. C. ____________inches W. C. ____________inches W. C. ____________inches W. C. ____________inches W. C.
____________inches W. C. ____________inches W. C. ____________inches W. C. ____________inches W. C. ____________inches W. C.
Table 14 Maintenance protocol
To Next Page
Loading...
Need help?
General