Special functions (additional menu)9
70 Operating instructions RC30 programmable room thermostat • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
Hold down "Display" and turn the dial until the required value
appears.
Release "Display" to store the value.
9.8 Changing the standard display
You can change the standard display on the RC30 either via the
additional menu or directly – as described in Chapter 8.19
"Changing the standard display", page 55. This section also
describes all the standard display options.
Disinfection day Mo, Tu, We, Th, Fr,
Sa, Su,
Mo–Su
Tu
Disinfection time 00:00 – 23:00 1:00
Input range Factory setting
+
USER NOTE
If possible, choose a time for thermal disinfection at which nobody
will be drawing off DHW (e.g. during the night).
To Next Page
Loading...
