1
MA601990_20 [Original Instructions] 10/04/2010
Vector Power Head
The Vector Power Head enables semi-automatic operation when used with the compatible grinder -
polishers and can prepare specimens using single force or central force applied pneumatic loading.
The Vector Power Head specimen capacity for single loading is one to four. The specimen capacity for
central loading is up to six depending on the specimen holder.
Warranty
This unit is guaranteed against defective materials and poor workmanship for a period of 24 months or
2000 hours (whichever comes first), from the date of receipt by the customer. The warranty is void if
inspection shows evidence of abuse, misuse, unsafe use or unauthorized repair. This warranty covers all
Buehler costs associated with the replacement of defective materials (e.g., parts and labor).
If for any reason this unit must be returned to Buehler for warranty service, please contact Buehler
Service at www.Buehler.com
or 1-800-283-4537 for prior authorization and shipping instructions. (If
outside the USA or Canada contact your local Buehler Representative.) Please have the following
information available when contacting Buehler:
Warranty does not cover damaged due to water in the airline.
• Customer Purchase Order Number
• Buehler Invoice Number and Date
• Serial Number
• Reason for return
Specifications
60-1990 Vector Power Head
Dimensions 8.5” W x 16” D x 13 ½” H (216 mm x 406 mm x 343 mm)
Electrical 85 – 265 Volt / 50 – 60 Hz / 1 phase
Motor 1/20 HP (32 watt)
Control Voltage 12 VDC
Sample Force in SINGLE 0 – 5 lbs in 1 lb increments (0 – 75 N in 5 N increments)
Sample Force in CENTRAL 4 – 60 lbs in 4 lb increments (20 – 300 N in 20 N increments)
Weight 28 lbs (13 kg)
Sample Sizes
1-inch, 1 ¼-inch, 1 ½-inch,
25 mm, 30 mm, 32 mm, 38 mm, 40 mm.
To Next Page
Loading...
