Need help?Do you have a question about the Buehler Vector and is the answer not in the manual?
Guidelines for proper operation, handling, and maintenance of the equipment.
Step-by-step guide for attaching the Vector Power Head to a MetaServ 250 Grinder Polisher.
Instructions for installing the Vector Power Head onto a dual platen grinder polisher base.
Specific instructions for connecting compressed air supply in European configurations.
Sets the desired running time for grinding-polishing cycles, with options for unlimited operation.
Selects the mode for applying force: Central, Single, or Manual operation.
Configures force measurement units to pounds (lbs) or Newtons (N) for force application.
Sets the rotation direction of the specimen holder and platen for optimal preparation.
Controls automatic water flow during grinding-polishing cycles and manual flow activation.
Integrates with dispensing systems for automated abrasive delivery during cycles.
Used to select parameters on the Vector Power Head control panel.
Increases parameter values on the control panel.
Decreases parameter values on the control panel.
Stops the grinding-polishing cycle and resets the control panel.
Details the use of central force holders for rigid specimen placement and high-volume preparation.
Describes single force holders for individual specimen preparation and examination.
Guides on programming and executing grinding-polishing cycles using the Single Force mode.
Instructions for programming and executing grinding-polishing cycles using the Central Force mode.
Step-by-step instructions for replacing the drive belt, including safety precautions.
General| Brand | Buehler |
|---|---|
| Model | Vector |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
