3 Select the drive to dismount and click Dismount Disk.
4 The "Confirm Operation" screen will open. Enter the confirmation number, then click OK. It will take about 30
seconds for the drive to be dismounted.
5 When the following message is displayed, it is safe to unplug the drive.
Note: To remount the drive, unplug it and then plug it back in when the function LED extinguishes.
Checking Drives
A drive check tests the data on a drive in the TeraStation or one that is connected via USB for integrity. Errors are
fixed automatically. With large drives, a drive check may run for many hours. Shared folders cannot be accessed
during a drive check. Do not turn off the TeraStation until the drive check is finished. Use the procedure below to run
a drive check.
1 In Settings, click Drives.
2 Select Drives to check an internal drive or USB Drives to check an external drive.
42
To Next Page
Loading...