If
you choose ON for UNLOCK and DRIVER for DOOR
TO UNLOCK, only the driver’s door will automatically
unlock when shifting into PARK or turning the key
to OFF.
If you choose ON for UNLOCK and ALL for DOOR
TO
UNLOCK, all doors will automatically unlock when
shifting into PARK or turning the key to
OFF.
To change modes, do the following:
1.
Move the arrow on the display between the
selections by pressing the ENG/MET button.
2.
Once you have made your selection, press the
RESET button and your choice will be retained
in memory.
See
Programmable Automatic Door Locks on page
2-1
1
for more information about this feature.
The number
of passenger windows locked out by the
window LOCK switch can be programmed through
the DIC.
If
you choose R
+
PASS,
all
three passenger window
switches
will
be inactive when the window LOCK switch
is enabled.
If
you choose REAR, only the two rear passenger
window switches will be locked out when the window
LOCK switch is enabled.
To
change
modes,
do
the following:
1.
Move the arrow on the display between R
+
PASS
and REAR by pressing the ENG/MET button.
2.
Once you have made your selection, press the
RESET button. Your choice will be retained in
memory.
For more information on this feature, see “Window Lock
Out” under
Power Windows on page
2-17.
3-53
To Next Page