20
The option to import and export recipes is possible via USB drive. When importing recipes, ensure the USB
drive is loaded with the correct file structure for the import to complete successfully. Performing an export for
a recipe will provide the correct folder structure.
Recipes can be exported from one machine and imported into another. This ensures consistent recipe
parameters and is convenient when setting up multiple machines.
• Open front door and verify if USB
port is located under the Normal/
Prgm/Rinse switch.
• If not present, proceed to Step 2.
• If present, proceed to Step 4.
STEP 1 STEP 2
• Locate the USB port on the
control board.
• Insert the USB device into
the port.
STEP 3
• Set the Normal/Pgrm/Rinse
switch to PGRM.
• Plug in and power on the
machine.
STEP 5
• Locate the USB port under the
Normal/Pgrm/Rinse switch.
• Insert the USB device into
the port.
STEP 4
• Power off and unplug the
machine.
• Loosen the hex screws at the
bottom of the left panel.
• Remove the panel.
• Use the Large Cup switch to
navigate to USB FUNCTIONS
screen.
STEP 6
OPERATING CONTROLS AND INTERFACE
Importing & Exporting Recipes
PROGRAM MODE
PRESS TO ENTER
Use to
Navigate
continued >
To Next Page
Loading...
