Burkert 2000 - 2 Basic Safety Instructions

6
Basic safety instructions
Type 2000, 2002, 2012
2 BASIC SAFETY INSTRUCTIONS
Thesesafetyinstructionsdonotmakeallowanceforany
• contingenciesandeventswhichmayariseduringtheinstallation,operationandmaintenanceofthedevices.
• localsafetyregulations;theoperatorisresponsibleforobservingtheseregulations,alsowithreferenceto
the installation personnel.
Danger – high pressure!
▶ Beforelooseningthelinesandvalves,turnothepressureandventthelines.
Risk of electric shock!
▶ Beforereachingintothedeviceortheequipment,switchothepowersupplyandsecuretoprevent
reactivation!
▶ Observeapplicableaccidentpreventionandsafetyregulationsforelectricalequipment!
Riskofburns/riskofreifusedcontinuouslythroughhotdevicesurface!
▶ Keepthedeviceawayfromhighlyammablesubstancesandmediaanddonottouchwithbarehands.
General hazardous situations.
▶ Thesystemcannotbeactivatedunintentionally.
▶ Installation and repair work may be carried out by authorized technicians only and with the appropriate
tools.
▶ Afteraninterruptioninthepowersupplyorpneumaticsupply,ensurethattheprocessisrestartedina
denedorcontrolledmanner.
▶ Thedevicemaybeoperatedonlywheninperfectconditionandinconsiderationoftheoperating
instructions.
▶ Thegeneralrulesoftechnologyapplytoapplicationplanningandoperationofthedevice.
english