Burkert 2000 Service Manual

7
General information
Type 2000, 2002, 2012
3 GENERAL INFORMATION
3.1 Contact addresses
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653Ingelngen
Tel.+49(0)7940-1091111
Fax+49(0)7940-1091448
E-mail:info@buerkert.com
International
Contactaddressesarefoundonthenalpagesofthe
printedoperatingmanual.
YoucanalsondinformationontheInternetunder:
www.burkert.com
3.2 Warranty
Thewarrantyisonlyvalidifthedeviceisusedasauthorizedinaccordancewiththespeciedapplication
conditions.
3.3 Information on the Internet
TheoperatinginstructionsanddatasheetsforType2000,2002and2012canbefoundontheInternetat
www.burkert.com
3.4 Reengineering
ReengineeringofType2000and2012changesthespareparts.Thesparepartsetsincludeallsparepartsfor
bothvalveversions.Thereengineeredvalvesareidentiedbytheletter“R”(seetherstlineofthetypelabel).
Flow 1 2
2000 A 50,0 NBR RG
Made in Germany
00182076
W1X LU
G 2 P med 16 bar
Pilot 1,6 - 10 bar
R
Identicationof
re-engineereddevices
Figure 1: Example of a type label with identication “R” for “Re-engineering”
3.5 Auxiliary materials
Thefollowingauxiliarymaterialsarerecommendedforconversionandrepairintheseinstructions:
Type of auxiliary material Auxiliary materials Manufacturer’s information
Sealerandanti-seizeagents SiliconegreaseOKS1110-3 OKSSchmierstoeGmbH
www.oks-germany.com
Lubricatingpaste KlüberpasteUH196-402 Klüber Lubrication München
www.klueber.de
Lubricant AmblygonTA Klüber Lubrication München
www.klueber.de
Liquidadhesive Loctite 274 HenkelLoctiteDeutschlandGmbH
www.loctite.de
english

Burkert 2000 Specifications

General

Model	2000
Manufacturer	Burkert
Ambient Temperature	-10 to +60 °C
Protection Class	IP65
Operating Temperature	-10 to + °C
Seal Material	FKM
Operating Pressure	0- bar
Fluid Temperature	-10 to + °C