Burkert 8221 - Technical Data; Rating Plate; Conformity to Standards and Directives; Conformity to the Pressure Equipment Directive

5. RATING PLATE
COND 8221 PEEK SST CLAMP
ID-Nr: 00564064
REF 243641 T: -20...135°C
LOT 1234567 p: 0...6 bar
SN 1001 2018-12-04 0,1...500000 uS/cm
1
2
4
3
78
5
6
9
10
11
1. Measured quantity and type of the product
2. Materials
3. Type of connection
4. Fluid temperature range
5. Fluid pressure range
6. Fluid conductivity measurement range (µS/cm)
7. Manufacturing code
8. Serial number
9. Lot number
10. Internal code
11. Article number
Fig. 1: Rating plate of a product with 4 electrodes (example)
6. TECHNICAL DATA
The rating plate of the product gives important technical data.
▶ Always respect the data given on the rating plate.
6.1. Conformity to standards and
directives
The applied standards, which verify conformity with the EU direc-
tives, can be found on the EU-type examination certificate and/or the
EU declaration of conformity (if applicable).
6.2. Conformity to the pressure
equipment directive
→ Make sure the product materials are compatible with the fluid.
→ Make sure the pipe DN and the PN are adapted for the product.
The product conforms to Article 4, Paragraph 1 of the Pressure
Equipment Directive 2014/68/EU under the following conditions:
7
Rating plate
Type 8221
English