To Next PageTo Next Page
Need help?Do you have a question about the Burkert 8798 and is the answer not in the manual?
General| Brand | Burkert |
|---|---|
| Model | 8798 |
| Category | Accessories |
| Language | English |
Describes warning symbols used in the manual for potential dangers.
Defines key terms like "device" and "Ex" for clarity.
Mentions export restrictions and the intended application of the device.
Covers high pressure, electric shock, and general hazards to personnel and equipment.
Provides contact addresses for Bürkert and relevant internet links.
Details regarding product warranty validity and conditions.
Overview of the sensor, its designs, and display elements.
Details linear and rotating sensor compatibility with various valve types.
Covers EC compliance, applied standards, and ATEX/cULus approvals.
Specifies ambient temperature range and degree of protection (IP/UL).
Details dimensions, housing material, and pneumatic parameters.
Shows examples of linear and rotating sensor type labels.
Details UL label, power consumption, communication, and connections.
Describes LED indicators and associated remedial actions for the linear sensor.
Describes the LED indicator and associated remedial actions for the rotating sensor.
Critical safety warnings and precautions to be observed during installation.
Step-by-step guide for installing the linear sensor on specific valve types.
Step-by-step guide for installing the linear sensor on series 26xx/27xx valves.
Procedure for rotating the actuator module for optimal alignment.
Procedure for rotating the linear sensor on series 26xx/27xx valves.
Safety and basic installation steps for the rotating sensor.
Using mounting kits and bridges to attach the rotating sensor to a swivel actuator.
Mounting kit, hoop attachment, and lever assembly for NAMUR push actuators.
Mounting bracket and lever mechanism for columnar yoke push actuators.
Safety warnings and precautions to be observed during fluid installation.
Steps for installing the process valve and the positioner.
Connection details for specific valve types with internal air supply.
Connection details for pneumatic connections on series 26xx/27xx valves.
Safety warnings and precautions for performing electrical installations.
Wiring and terminal configuration for connecting the linear sensor to the positioner.
Wiring and terminal configuration for connecting the rotating sensor to the positioner.
Safety and operational guidelines for personnel before start-up.
Safety procedures and precautions to be observed during maintenance.
Step-by-step guide for servicing the intake air filter.
Guidelines for protecting device during transport, storage conditions, and disposal.
