11
Technical data
6.3.6. Specifications of the "pH/redox" module
pH measurement
• pH measurement range
• Resolution of pH measurement
• Accuracy of pH measurement
• Potential difference measurement range
• Resolution of potential difference
measurement
• Accuracy of potential difference
measurement
• pH probe type
• -2.00...+16.00
• 0.01pH
• 0.02pH
• -600...+600mV
• 0.1mV
• 1mV
• Electrochemical
Power consumption 0.1VA
Measurement of the oxidation reduction
potential
• Oxidation reduction potential measurement
range
• Resolution of the potential difference
measurement
• Accuracy of potential difference
measurement
• Oxidation reduction potential probe type
• -2000 ... +2000mV
• 0.1mV
• 1mV
• Electrochemical
Temperature measurement
• Measurement range
• Measurement resolution
• Measurement accuracy
• Temperature sensor type
• -25°C ... +130°C
• 0.1°C
• 1°C
• Pt100 or Pt1000, with 2 or 3 wires
Electrical connection
• Per detachable 9-point set-screw connector, grey
• Refer to chap. 6.3.8 for the specifications of connection
cables
6.3.7. Specifications of the "COND" conductivity module
Resistance measurement (without conductivity
sensor connected)
5W ... 1MW
Power consumption 0.25VA
Conductivity cell type With 2 or 4 electrodes; the specifications of Bürkert cells are
described in the related operating instructions.
Type 8619
english
To Next Page
Loading...
