•
Use only the specific charger supplied to charge the battery.
•
Do not use any power supply or electrical device other than the one supplied with
the device.
•
Only charge the battery in a well-ventilated area.
•
Do not expose the battery to heat or charge the e-scooter in direct sunlight.
•
Do not disassemble or modify the battery case built into the footboard
compartment of the scooter.
•
Do not connect the (+) and (-) connections of the battery plug with a metal object.
•
Do not expose the battery to liquids.
•
Do not use a damaged battery.
•
Do not continue to charge the battery if it is not fully charged after the theoretical
charging time, see “Battery Specifications” below.
•
Do not use the battery if it emits an unusual smell or becomes unusually hot.
•
If the e-scooter is not used frequently over a period of time, it should be fully
charged every 60 days.
•
The scooter should be stored in a dry, protected place.
•
at a temperature between 5 and 35°C.
•
Do not leave the battery charging for an extended period without attention.
•
If the battery leaks, be careful not to let the liquid come into contact with the skin
or eyes. If this happens, wash with plenty of water and seek medical attention.
•
For battery repairs or replacement, contact a qualified technician.
5.7. Battery service life
Battery service life is dependent on usage profile.
Do not expose the battery to temperatures lower than -10°C or higher than 40°C. Doing
so may affect its operation and life.
Batteries can suffer from ageing of their performance after numerous charges, this will
be determined by usage habits.
5.8. Using the battery
To ensure maximum battery life and to protect the battery from damage, please follow
the use and care instructions below:
•
When the battery charge state falls to 25%, the battery should be recharged.
•
When the battery icon on the display appears empty and flashes, it means that
the voltage is low and the Busbi Wasp scooter will not have enough power to
operate normally. In these circumstances switch off the Busbi Wasp ad recharge
the battery.
Do not use the Busbi Wasp when the battery is low or the system requires a safe
shutdown. Battery service life will be shortened if you continue to use the Busbi Wasp
while the battery voltage is low.
To Next Page
Loading...
