Before each and every use, carry out the inspection schedule described below:
Table 1
-
Inspection Schedule
Check and confirm all screws and fasteners are tightened
correctly.
Handlebar stem folding
system and lock
•
Ensure folding system is free from debris and obstructions.
•
Visually inspect handlebars and handlebar stem for cracks,
deformation or discoloration.
•
Ensure handlebar stem locks securely in position, and is
unable to inadvertently fold when riding.
• Check and adjust tyre pressure to 50 PSI.
• Visually inspect tyres for cracks or foreign bodies.
• Check tyre tread is adequate to maintain grip when riding.
• Visually inspect frame for cracks, deformation or discolouration.
• Visually inspect for correct positioning and alignment.
• Visually inspect axles and nut and bolt joints.
• Test brake functionality.
Thumb operated accelerator
• Check operation and freely returns to zero position after
release.
•
Test (front / rear / brake) - lighting functionality.
•
Test bell functionality.
•
Ensure cover securely closed.
•
Ensure secure.
•
Ensure not obstructing wheel rotation.
To Next Page
Loading...
