3. Preparing for first use:
Open the box and carefully take out all the parts, confirming the
contents.
Please retain the packaging, this will allow return of the product in
the event of any problems.
3.1 Assembly.
Place the e-scooter on the floor.
Push straight down on the rear mud guard
and hold, so as to release the locking hook
from the buckle.
Whilst holding down the rear mud guard, pull
the handlebar stem up and forward until you
hear the handlebar locking mechanism
engage with a ‘click’.
Place the scooter onto the kick stand.
Using the Allen key provided, unscrew and
remove the two bolts holding the locking hook
to the handlebar stem.
Remove the plastic stopper from top of the
handlebar stem. Retain the plastic stopper
with your packaging in case of return.
To Next Page
Loading...
