UK Declaration of Conformity | 16
0870231979_WT0100-0730CP_CV_-0001_IM_en 35 / 36
16 UK Declaration of Conformity
This Declaration of Conformity and the UKCA-mark affixed to the nameplate are valid for the machine within the
Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery
(this can be the operating company, too) must conduct the conformity assessment process for the superordinate
machine or plant, issue the Declaration of Conformity for it and affix the UKCA-mark.
The manufacturer Busch Výroba CZ s.r.o.
Svárovská 620
CZ 460 01, Liberec 11
declares that the machine(s): TYR WT 0100 C, WT 0150 C, WT 0280 C, WT 0390 C, WT 0600 C, WT 0730 C
fulfill(s) all the relevant provisions from UK legislations:
– Supply of Machinery (Safety) Regulations 2008
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in electrical and electronic equipment Regulations 2012
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standard Title of the Standard
BS EN ISO 12100 : 2010 Safety of machinery. Basic concepts, general principles of design. Risk assess-
ment and risk reduction.
BS EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being reached
by the upper and lower limbs.
BS EN 1012-1 : 2010
BS EN 1012-2 : 1996 + A1 : 2009
Compressors and vacuum pumps. Safety requirements. Air compressors and
vacuum pumps.
BS EN ISO 2151 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
BS EN 60204-1 : 2018 Safety of machinery. Electrical equipment of machines. General requirements.
BS EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity standard
for industrial environments.
BS EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission standard
for industrial environments.
BS EN ISO 13849-1 : 2015
(1)
Safety of machinery. Safety-related parts of control systems. General principles
for design.
(1)
In case control systems are integrated.
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Busch (UK) Ltd
30 Hortonwood
Telford - UK
Liberec, 16.04.2021
Michael Dostalek
General Manager
To Next Page
Loading...
