4 | Storage
8 / 36 0870231979_WT0100-0730CP_CV_-0001_IM_en
4 Storage
• Seal all apertures with adhesive tape or reuse provided caps.
If the machine is to be stored for more than 3 months:
• Wrap the machine in a corrosion inhibiting film.
• Store the machine indoors, dry, dust free and if possible in original packaging
preferably at temperatures between .
NOTICE
Long storage time (over 6 months).
The blower shaft should be rotated by hand periodically, at least once a month, in or-
der to renew the grease on the bearing races and keep a periodical record. Failure to
carry out this procedure could invalidate the product warranty.
NOTICE
Long storage time (more than 6 months).
For long storage time or storage in a warehouse with substantial fluctuations in tem-
perature and/or an aggressiv atmosphere, the rotary lobe blower must be prepared in a
special procedure from Busch Vyroba CZ s.r.o. (according to customer information dur-
ing order preparation).
All specific preparations and procedures must be preserved during a storaging all the
time. The rotary lobe blower must be wrapped in a special VCI foil all the time during
storaging.
To Next Page
Loading...
