Standard features
Simple everyday use
Standard features24
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Note: Steps 3 and 4 are available only when a menu is
recorded on the disc.
3. Press Down / Up / Left / Right or the numeric
button(s) to select the preferred title.
4. Press OK.
To confirm the selected items. The played item may
be a motion picture, a still picture or another submenu
depending on the disc.
For your reference:
If an action corresponding to a button is prohibited the
“ ”
symbol appears.
Notes on Playback:
1. No sound will be heard during Rapid advance or
Rapid reverse.
2. No sound will be heard during Slow motion play.
3. Reverse slow motion play may not be available
depending on the DVD content.
4. In some cases, the subtitle language is not changed
immediately to the selected one.
5. When the preferred language is not selected even
after pressing the button several times, it means
that the language is not available on the disc.
6. When the player is restarted or the disc is changed,
the subtitle selection is automatically changed back
to the initial settings.
7. If a language is selected, not supported by the disc,
the subtitle language will automatically be set to
the disc’s priority language.
8. Usually a circulation will happen while switching
to another language, that is you can cancel the
subtitle by pressing this button a number of times
until “Subtitles Off” appears on the screen.
9. When the power is turned on or the disc is
removed, the language heard is the one selected at
the initial settings. If this language is not recorded
on the disc, only the available language on the disc
will be heard.
10. Some DVDs may not contain root and/or title
menus.
11. Reverse stepping is not available.
12. If you attempt to enter a number greater than
• the total time of the current title, the time
search
• box disappears and “
“ ”
Input Invalid”
message
• appears on up-left corner of screen.
13. Slide Show is disabled when the ZOOM mode is
on.
To Next Page
Loading...
