Standard features
Simple everyday use
Standard features 23
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Using the Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options. Press the OK/TV button to open the Channel
List. You can filter the listed channels by pressing the
Blue button or open the Edit Channel List menu by
pressing the Green button in order to make advanced
changes in the current list.
Managing the Favourite Lists
You can create four different lists of your favourite
channels.
Enter the Channel List in the main menu or press the
Green button while the Channel List is displayed on
the screen to open the Edit Channel List menu and
select the desired channel on the list. You can make
multiple choices by pressing the Yellow button. Then
press the OK button to open the Channel Edit Options
menu and select Add/Remove Favourites option.
Press the OK button again. Set the desired list option to
On. The selected channel/s will be added to the list.
To remove a channel or channels from a favourite list
follow the same steps and set the desired list option to
Off.
You can use the Filter function in the Edit Channel
List menu to filter the channels in the Channel list
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite lists
to be displayed every time the Channel list is opened.
The filtering function in the Channel list menu will
only filter the currently displayed Channel list to find
a channel and tune in to it. These changes will not
remain the next time the Channel list is opened.
How to Watch a DVD
When placing a disc into the loader, labeled side of the
disc should be on the front.
When TV set is turned on, first switch to DVD source
by using the Source button on the remote control.
Press play on the remote control, or directly press play
button at the front panel. If there is no disc inside the
loader, place a DVD first and press play.
Note: If you switch to another source by pressing
Source, Swap or Programme +/- buttons on the
remote control, DVD playback will be paused
automatically. You should press Play button and
resume the playback manually when you switch to
DVD mode.
DVD Control Panel Buttons
/ (Play / Pause)
Plays/pauses the disc. When DVD menu (root menu) is
active, this button functions as “button select” (selects
the highlighted item in menu) if this is not prohibited by
the disc.
/ (Stop / Eject)
Stop playing disc / Eject or Load the disc.
Notes:
• You cannot eject the disc via the remote control.
• While playing a file, you should press STOP button
three times to eject.
General Playback
Basic Play
1. Press on the power button
2. Please insert a disc into the loader.
The disc will be automatically loaded and play will
commence if the disc does not have any menus
recorded on it.
A menu may appear on the TV screen after a few
moments or the film may start immediately. This
behaviour depends on the disc content and may
change.
To Next Page
Loading...
