Advanced features
Getting the most from your TV
Advanced features 31
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Now/Next Schedule
• Navigate (Directional buttons): Press the
Directional buttons to navigate through the
channels and events.
• Options (OK button): Displays event options.
• Event Details (Info button): Displays detailed
information about selected events.
• Filter (Blue button): Views filtering options.
Event Options
Use the directional buttons to highlight an event and
press OK button to display Event Options menu. The
following options are available.
• Select Channel: Using this option, you can switch
to the selected channel.
• Set Timer on Event / Delete Timer on Event: After
you have selected an event in the EPG menu, press
the OK button. Select Set Timer on Event option
and press the OK button. You can set a timer for
future events.
To cancel an already set timer, highlight that event and
press the OK button. Then select Delete Timer on
Event option. The timer will be cancelled.
Notes: You cannot switch to any other channel or
source while there is an active timer on the current
channel.
It is not possible to set timer for two or more individual
events at the same time interval.
Teletext Services
Press the Text button to enter. Press again to activate
mix mode, which allows you to see the teletext page
and the TV broadcast at the same time. Press once
more to exit. If available, sections in the teletext pages
will become colour-coded and can be selected by
pressing the coloured buttons. Follow the instructions
displayed on the screen.
Digital Teletext
Press the Text button to view digital teletext
information. Operate it with the coloured buttons,
cursor buttons and the OK button. The operation
method may differ depending on the contents of the
digital teletext. Follow the instructions displayed on the
digital teletext screen. When the Text button is pressed
again, the TV returns to television broadcast.
Software Upgrade
Your TV is capable of finding and updating the firmware
automatically via the broadcast signal.
Software upgrade search via user interface
On the main menu select System>Settings and then
More. Navigate to Software upgrade and press the
OK button. In Upgrade options menu select Scan
for upgrade and press OK button to check for a new
software upgrade.
If a new upgrade is found, it starts to download the
upgrade. After the download is completed confirm the
question asking about rebooting the TV by pressing the
OK to continue with the reboot operation.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 o’clock if
Automatic scanning option in the Upgrade options
menu is set to Enabled and if the TV is connected
to an aerial signal. If a new software is found and
downloaded successfully, it will be installed at the next
power on.
Note: Do not unplug the power cord while led is
blinking during the reboot process. If the TV fails to
come on after the upgrade, unplug, wait for two
minutes then plug it back in.
To Next Page
Loading...
