BWB XP - Page 36

Sampling modes
In Auto Read mode the results are stored for retrieval. A maximum of
up to 200 results can be stored in the BWB-XP memory.
NOTE: The required number of results can be selected in the Setup –
Config –AutoRead menu (Max Results). Enter the required number of
results and press accept to confirm.
Select option3>Results to display and use the arrow keys to view
individual results.
Results may be printed (if printer is fitted and ON) by pressing key 1,
or deleted by pressing key 0.
Selecting option 2>AutoR Sample:
enables the next sample number to be changed. Enter the required
sample number (1-199) and press accept. If a sample number is
chosen which already has a result assigned, the option to clear the
result or to go back and choose an alternative sample number is
presented.
1>AutoR
2 AutoR Sample: 1
3 Results
1>AutoR
2 AutoR Sample: 1
3 Results
36
https://www.bwbtech.com/warranty
When the buffer is full there will be a prompt to delete the results.
Once deleted, the buffer will recommence from Sample 1.
It is recommended that a batch of samples be deleted once they
have been viewed and/or printed. A permanent storage can be
achieved by up loading the results using the FP-PC software. Refer
to the separate FP-PC Manual.