Accessories & Interfaces
Printer module (if fitted)
There are three control keys on the face of the Print Module; Open, SEL
and LF.
OPEN: opens the door for paper replacement.
SEL: selects the operation mode.
When the light is on the printer is on-line and ready to be used.
When the light is off the printer is off-line.
LF: (Line feed) is used to advance the paper without printing.
Press it once and the paper starts to feed.
Press it again and the paper stops feeding.
NOTE: The printer must be off-line (SEL) for this function to work.
Paper replacement
• Ensure the Print Module is in the on-line mode (SEL).
• The printer function can be toggled on/off in the menu structure of
the instrument by selecting option 4 Setup, option 2 Interfaces and
option 4 Printer On/Off from the Main menu.
• It will remain in the chosen mode unless changed.
• Toggle it ON to print.
• The Auto Read mode must be used. When the Auto Read locks the
concentration readings and the printer is on, it will automatically
print the result(s). Only calibrated ions will be included in the
printout.
• Calibration values can also be printed. After a calibration is
performed the instrument display will return to the Calibrations
menu.
• Press Print and the values of each point for each ion will be printed.
• When using the BWB AFHS, the tray results along with the tray ID,
date and time, will be printed automatically as long as the printer is
set to on-line mode and ON is selected on the instrument.
Print functionality
When the red stripe appears at the side of the paper roll, it
indicates that the paper is reaching the end of the roll.
To replace the paper:
Press OPEN to open the paper replacement door. Take out the
remaining paper core.
Place the new paper roll inside with the paper coming out of the
exit slot.
NOTE: BWB supplied paper (014-951) should be mounted so that
the paper comes off the top of the roll as shown.
Close the door. Use the LF key to feed the paper and ensure it is
correctly installed into the printer module.
Maintenance
The printer does not require any maintenance other than the
replacement of paper rolls.
For replacement paper contact your local agent or BWB.
BWB only supply high grade, long lasting (10 year) thermal paper.
Service
The printer Module is non-serviceable
39
To Next Page
Loading...
