EasyManua.ls Logo

BYD e3 2019 - When Failure Occurs; Intelligent Key Battery Runs out

BYD e3 2019
219 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-1 When Failure Occurs 201
When Failure Occurs
7-1 When Failure Occurs
WARM TIP
If the vehicle needs to be stopped in emergency, please wear the reflective
vest equipped with the vehicle in time.
7-1 When Fai lure Occurs
Intelligent Key Battery Runs Out
If the vehicle cannot be started by the intelligent key and the indicator on the
intelligent key does not flash, the intelligent key battery may be about to run out.
Carry the intelligent key to BYD authorized service provider for replacing the
battery as soon as possible. In this case, you may start the vehicle in no power
mode.
CAUTION
Do not put the key in a high-temperature area.
Do not pat key with hard matters or fling it.
Put the key far away from magnetic field.
When the vehicle enters the anti-theft mode with doors locked, if you do
not use the vehicle, please keep the key far away from the vehicle because
the LV battery power will be consumed as the vehicle performs the
automatic key locating function.
1. Unlock the vehicle by using a mechanical key.
2. Depress the brake pedal and press the START/STOP button, and then the
intelligent key position indicator on the instrument will illuminate and the
buzzer in the vehicle will buzz once.
3. Put the intelligent key close to the
no power icon of the center console
glove box as shown in the figure
(configuration 1) within 30s after the
buzzer sounds, and then the buzzer
will sound once again and the
intelligent key system warning light
will go out, indicating that the
vehicle can be started.
The keyless induction antenna is at the bottom of the central armrest
storage box. With the key placed in the box, the vehicle can be started
(configuration 2).
4. Start the vehicle within 5s after the buzzer sounds again.

Table of Contents

Related product manuals