4-1 Charging Instructions 87
Charging
stops in the
charging
process
The temperature of
power battery is too
high or too low
The EV function limitation is displayed on
the combination instrument and the charging
equipment will stop charging automatically.
Recharge after the battery cools down.
The vehicle or
charging equipment
is faulty
Contact a BYD authorized service provider
after confirming that there is a prompt of the
fault of equipment or vehicle.
Press the key or
microswitch
To stop charging, pull out the charging plug
within 30s after unlocking.
Charging Method
■ Inspection before charging:
● Make sure that the charging device has no abnormalities such as
cracked housing, worn cable, rusted plug or foreign object.
● Do not charge when the connection of the charging connection
device becomes loose.
● Make sure that there is no water or foreign object in the charging port,
and the metal terminal is not rusted or corroded.
■ If any of the above conditions occurs, charging is prohibited; otherwise, it
may cause short circuit or electric shock, resulting in personal injury.
AC charging with household portable equipment
1. Description of equipment
■ AC charging connection device is a
charging unit delivered with the
vehicle, and it connects the vehicle
and the standard household
single-phase two-pole socket
(220V, 50Hz, 10A) with grounding
to charge the vehicle.
To Next Page
