BYD e3 2019 - Charging Port Electric Lock Function

98 4-1 Charging Instructions
WARM TIP
● The intelligent charging function and front compartment fan may start
automatically in the long-time parking process of the vehicle. This is a
normal phenomenon and not a vehicle fault.
● The power for intelligent charging comes from the power battery, so that
the SOC may decrease when the vehicle enters the intelligent charging
mode. This is a normal phenomenon, not a vehicle failure.
Charging Port Electric Lock Function
To prevent theft of the charging plug, the anti-theft function of AC charging port
is activated in the charging / discharging process of the vehicle. This function is
deactivated by default. To activate this function, operate as per the following
steps:
Multimedia control (if any)
■ Tap "Vehicle" under "Settings" on
the multimedia screen;
■ Under "Anti-theft setting of charging
port", set the working mode to
"Active".
Instrument control (if any)
■ Open the instrument menu and
select "Personalization" setting;
■ Under "Working mode setting of
electric lock at charging port", set
the working mode to "Active".