86 4-1 Charging Instructions
instrument for details.
2. Instant charging (charging starts after connection to the charging port or
after operation)
Diagnosis of general charging faults
The power battery is
fully charged
When the power battery is fully charged, it
will automatically stop charging.
Charging
unavailable,
physical
connection
completed,
and
charging
not started
The temperature of
power battery is too
high or too low
Place the vehicle in an environment with
suitable temperature and recharge it when
its temperature becomes normal.
Start battery is
over-discharged
Replace the start battery
The charging
equipment is faulty
Confirm that the power indicator of the
charging equipment is normal or there is no
other abnormal message; otherwise,
replace the charging equipment to charge or
contact the charging equipment supplier.
The vehicle display
is faulty
Stop charging and contact a BYD authorized
service provider after confirming that there is
any prompt message of charging system
fault.
Charging
stops in the
charging
process
Within a certain period of time, if the power
grid resumes power supply, charging will
restarted.
Charging cable is
not connected
properly
Confirm that the cable of charging
connection device is not loosely connected.
The button of
charging connection
device is pressed
down
The charging equipment will stop charging if
the button of charging connection device is
pressed down. Re-connect the charging
connection device to start charging.
To Next Page
