1-3 Child Restraint System 33
● When using a lower anchor, make sure that no foreign objects are around
the anchor and the seat belt is not stuck behind the child safety seat. Make
sure that the child restraint system is fixed firmly. Otherwise, severe injury
or even life threat may be caused to a child in case of emergency stop or
accident.
● The anchorage lever is installed in the gap between seat cushion and seat
backrest.
2. Lift the headrest. Open the anchor
base cover. Attach the clip to the
anchor base and tighten the top
tether. Make sure that the top
tether is attached securely.
Clip
Top tether
Anchor base
● Push/pull the child safety seat to different directions and make sure it has
been securely installed.
● If the child restraint system is provided with a top tether, fix the top tether to
the anchorage position.
■ If the driver's seat obstructs the correct installation of the child restraint
system, install it on the rear right seat.
To Next Page
