64 3-2 Seats
Taking off headrest
Press and hold the headrest height adjustment button, take off the headrest,
and then release the button.
Installing headrest
Insert the headrest connecting rod into the seat cover and keep the groove
facing forward. Press the headrest height adjustment button, lower the
headrest to a proper position, and release the button. After that, lift the headrest
in a small range, and release the headrest until a lock-up sound is heard.
● To avoid neck injury and other head injuries, adjust the headrest height to
make the center of the headrest flush with the upper level of your ear.
● After adjusting the headrest, press down the headrest to confirm that it is in
the locked position.
● Do not drive the vehicle if no headrest is provided.
● Do not attach any object to the headrest lever.
To Next Page
