BYD M6 - Page 110

BYD M6 AUTO Owner’s Manual
Other Equipments 1-102
A strong point light source will be
displayed as a light spot on the
screen, making the surrounding
objects indistinguishable.
Reversing Vision
When the Start button is at ON, set
the shift lever to R position to enable
the reversing vision mode.
The reversing camera installed on the
rear door has a limit view angle. The
objects near both ends of or under the
bumper cannot be displayed in the
reversing vision.
See the figure below:
Objects near both ends of the bumper
Objects under the bumper
Front Right Vision
Press the Vision ON/Switch button on
the steering wheel to enable the front
right vision.
The floor lights will come on to provide
lighting around the vehicle if the
outside is dark.
To turn off the parking vision system,
press the OFF button on the steering
wheel.
The front right camera is installed on
the right exterior rearview mirror.
The camera has a limit view angle.
The objects that is straight in front of
the vehicle or to the rear right of the
vehicle cannot be displayed in the
front right vision.
See the figures below:
Objects straight in front of the vehicle
Objects to the rear right of the vehicle
ON/Switch
Off