BYD M6 AUTO Owner’s Manual
Other Equipments 1-103
Parking Operation
Turn on the parking vision system
when parking your vehicle.
You can use the front right vision
mode if reversing is not required.
Move the vehicle to the parking space
while observing the area around the
vehicle and looking at the parking
vision display
While reversing, you can switch
between the reversing vision and front
right vision by operating the Vision
button, so that you can see the blind
corners.
The reversing camera is installed on
the rear door.
Display on touch screen
The lines are reversing safety lines.
Red: 0-0.5m
Yellow: 0.5-1.5m
Green: 1.5-2.5m
CAUTION
y The reversing safety lines serve
as reference lines only for a
no-load vehicle.
The front right camera is installed on
the exterior right rearview mirror.
Display on touch screen
The range displayed in the vision may
vary with the vehicle orientation and
road conditions.
To Next Page
Loading...
