To Next PageTo Next Page
Need help?Do you have a question about the C-COM Satellite iNetVu 7710 and is the answer not in the manual?
General| Frequency Range | 950-2150 MHz |
|---|---|
| Type | Satellite Modem Controller |
| Compatibility | iNetVu antenna systems |
| Interface | Ethernet, RS-232 |
| Power Supply | 12V DC |
| Satellite Acquisition | Automatic |
| Controller Type | Satellite controller |
| Operating Voltage | 12V DC |
| Input Level Range | -25 dBm to -65 dBm |
| Modulation | QPSK, 8PSK |
| Symbol Rate | 1 to 45 Msps |
| LNB Power | 13/18 VDC |
| Operating Temperature | -30°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | Up to 95% non-condensing |
Detailed technical specifications including dimensions, power, and interfaces.
Description of the front and rear panel components and connectors.
Illustrates common connection configurations for the controller.
Procedures for installing the controller, software, and drivers.
Explanation of the status indicated by each LED on the front panel.
How to use manual and automatic control buttons for system operation.
Describes the functions and displays within the Monitor menu.
Explanation of core operation commands like Find Satellite and Stow.
Step-by-step guide for initial system configuration using the wizard.
Detailed guide on configuring communication, system, beam, and modem parameters.
Overview of the available menu options in the web interface.
Tables containing default limits and configuration data for system setup.
Step-by-step guide for updating controller firmware versions.
Details on DC input power cable connectivity and pin list.
