C-COM Satellite iNetVu 7710 - Cc1; Cc2

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
59
7.12.1. CC1
This branch menu displays the Central Controller ID (serial number), Hardware Version,
Firmware, and Boot loader Version
Fig. 48: “CC1” (Controller Info) Display
1 – Controller ID Number
The iNetVu
®
Controller Serial Number is located on the base of the controller. The ID displays the
last 5 digits of the Serial Number.
2 – Signal Quality Threshold
Minimum SNR Value required for the iNetVu
®
7710 Controller to validate signal.
3 – 7700 Series Central Controller Board Hardware Type Version.
4 – 7700 Series Central Controller Firmware and Boot loader version.
The firmware version is to the left of the dash (i.e. 7.7.1.0 - 7.3.3.0), and the boot loader version is
to the right of the dash (i.e. 7.7.1.0 - 7.3.3.0).
7.12.2. CC2
This branch menu displays the Remote Drive Module ID (serial number), Hardware Version,
Firmware, and Boot loader Version.
.
Fig. 49: “CC2” (Remote Drive Module Info) Display
1 – iNetVu
®
7720 Remote Drive Module ID
The iNetVu
®
7720 Remote Drive Module Serial Number is located on the back of the Remote
Drive. The ID displays the last 5 digits of the Serial Number.
2
ID: 17005 SQT: 31 H:1
FBV: 7.7.1.0—7.3.3.0
1
3
4
ID:17023 CAN:4 H:0
FBV:7.7.1.0 —7.3.2.0
1
2
3
4