C-COM Satellite iNetVu 7710 - Introduction to the iNetVu 7710 Controller

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
9
1. Introduction
The iNetVu
®
7710 Controller is a one-box, one-touch solution for satellite auto-acquisition.
Designed to interface with a number of Satellite Modems, iNetVu
®
VSATs, and DVB-S/DVB-
S2ACM Receivers, the iNetVu
®
7710 Controller connects to iNetVu
®
platforms which are
equipped with 7720 on-board module (Remote Controller). The 7710 will only work with the
remote on-board 7720 controller and the same holds true for the 7720. The iNetVu
®
7710
Controller is easily configurable and operated antenna controller unit which comes with the
combined GPS/GLONASS Satellite Navigation System.
Fig. 1: iNetVu
®
7710 Controller
Fig. 2: iNetVu
®
7720 Controller
The iNetVu
®
7710 Controllers are fully functional and configurable straight out of the box solution.
No PC or monitor required. An I/O GLONASS/GPS Module inside the 7720 module and the
capability to connect an external GLONASS/GPS device via serial port, a DVB-S2ACM/CCM
Tuner, an onboard LCD displaying real-time system status, and a Keypad Navigator, makes it
easy to use the iNetVu
®
7710 Controller by simply configuring the controller right from the front
panel.
The iNetVu
®
7710 Controllers along with any iNetVu
®
platform can work as a complete stand-
alone unit. No modem or RF splitters are required for satellite acquisition. The LNB can be
powered straight from the controller.
The 7710 (central board) with the 7720 (remote drive module) Controllers complement the
iNetVu
®
New Generation systems allowing movement on three axis simultaneously improving
satellite acquisition speed and accuracy.