C-COM Satellite iNetVu 7710 - LCD Screen and Navigator Keypad Operation

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
22
Note: powering on/off the 7710 Controller will also power off the 7720 Remote Drive
Module which is located at the platform base.
How to Reset the Controller
Press “RESET” Button
Power-cycles the iNetVu
®
Controller
DOES NOT reset default values
7.3. LCD Screen and Navigator Keypad Operation
Fig. 9: iNetVu
®
7710 Controller LCD and Keypad Navigator
Used to move the cursor position.
Used to select a displayed function
Used to back out of a selection and return the display to the previous selection
←
→
↑
↓
ENTER
EXIT