C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
9.1.5. MODEM
Satellite Modem service type selection, and modem parameter configuration that include and
are not limited to disable/enable options for ACP, TX_DIS, TX, RX, BC and 22k. Service sub id
for multiple beacon satellite search under NA, choose Typical for normal operation or select one
of the custom Configurations that have been created.
Fig. 87: Web Interface – Modem Configuration Screen
9.1.6. PLATFORM
The platform type, version and serial number can be configured here. EL, Compass and PL
offset can be set under this menu option.
9.1.7. MAINTENANCE
This section has RESET which restarts the 7710 controller, UPDATE FIRMWARE which allow
the firmware to be updated after the controller is in updating mode and finally the RESTORE
SETTINGS which will reset all platform related parameters to factory defaults, as well the Beam
and Service configuration settings will be reset.
Fig. 88: Web Interface – Beam Maintenance Screen
To Next Page
Loading...