C-COM Satellite iNetVu 7710 - A_Acp; M_Acp; S_Acp; Info

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
58
7.11.4. A_ACP
Initiates an automatic cross-pol test.
7.11.5. M_ACP
Initiates a Manual cross-pol test.
7.11.6. S_ACP
Stops the cross-pol testing instantly.
7.12. INFO
Displays information regarding the iNetVu
®
7710 Controller’s firmware, software versions and
MAC address information, the Mobile Platform type currently configured, and also any Error
Codes detected.
Fig. 47: “INFO” (Information) Display
CC1
Contains information pertaining to the iNetVu
®
7710 Controller hardware
version, Controller ID, firmware version, boot loader version, Signal
Contains information pertaining to the iNetVu
®
7720 Controller hardware
version, Controller ID, firmware version, boot loader version, Signal
CC2
DVB_D
Contains information pertaining to the type of DVB Module in use.
DVB_P
Contains information pertaining to the DVB lock status, as well as the
real-time DVB data such as type, modulation, frequency, code rate, and
symbol rate.
MOD
Contains information pertaining to the modem ID, serial number, and
version.
SYS
Contains information pertaining to the Platform Type, Serial Number.
MAC
Threshold, MAC address and configuration ID.
ERR
Contains information pertaining to the error code if an error occurs.
CC1 CC2 DVB_D DVB_P
MOD SYS MAC ERR